Mother's Day Mirror Purse SWAROVSKI™

Download the full PDF below!


STEP 1: Print and cut out the pattern shown in the illustration on a piece of plain paper. It should be exactly according to size noted. Put double sided tape behind the pattern and affix it to the back of the leather.
STEP 2: Cut out a piece of leather according to the pattern and remove the pattern from the leather piece. Repeat this step once again so you have two pieces of leather.
STEP 3: Fold 0.6” of leather over as shown in the illustrations. Sew the two pieces together with a sewing machine using white sewing silk. Repeat this step for the other pieces of leather as well.
STEP 4: Cut out a leather strip of 0.12” x 3.9”. Sew one end of the strip 0.4” from the left edge of the leather. Sew the other end onto the reverse side as shown below.

 Cut three 39.3” pices of 0.25mm nylon thread. Sew 4 back stitches at the reverse side of one of the leather pieces and stitch over to the front side. Insert the Crystal Lavender Pearl 5840 14mm onto the needle and stitch to the back side. Repeat this twice to attach the Pearl.

 Repeat the above step to attach the other CRYSTALLIZEDTM - Swarovski Elements as shown in the illustration. After the last crystal is attached, stitch to the back side and make 4 back stitches, then cut off the remaining thread.

 Sew the two pieces of leather together with a sewing machine as shown. To close the purse, pull the leather strip over the large Crystal Pearl as shown below.