Fancy Swarovski Ornament by Maryanne Walczak

Supply List For Fancy Ornament:

• 20 Gauge Artistic Wire – Brass – 5 inch piece and 6 inch piece
• 4mm 5810 Pearls – White - Quantity = 3
• 6mm 5301 Beads – Crystal AB - Quantity = 2
• 8mm 5000 Beads – Crystal AB - Quantity = 2
• 8mm Swarovski Rondelles Crystal - Gold – Quantity = 2
• 12mm 5810 Pearls – White - Quantity = 1
• 8mm Jump ring – Gold Color - Quantity = 1
• 6090 Baroque 22X15mm Pendant – Crystal AB - Quantity = 1

Step 1:

Make a wire wrapped loop using the 6 inch piece of wire

Step 2:

Place the following on the piece of wire as shown:

3mm Pearl, 6mm Bicone Crystal, 8mm Round Crystal, Gold Rondelle, 12mm Pearl, Gold Rondelle, 8mm Round Crystal, 3mm Pearl

Step 3:

Make a wire wrapped loop on the other end of the piece of wire

Step 4:

Using the 8mm jump ring, attach the wire wrapped piece to the Baroque Pendant

Step 5:

Using the 5 inch piece of wire, make a simple loop on one end

Step 6:

Using something round, form a circle with your wire.  I used a small 1 inch plastic container but you can also use a peg from the WigJig.

Step 7:

Using flat nose pliers, bend the wire 90 degrees leaving an opening of approximately 1 inch

Step 8:

Place the 3mm Pearl onto the wire

Step 9:

Cut the excess wire at the bottom, leaving approximately 0.4 inches (or 1 centimeter)

Step 10:

Make a simple loop and attach to the main ornament.  Be sure to close the simple loop.

Fancy Swarovski Ornament is now complete